Holds,
printed
to order.
Climbing holds for home walls and boards. Every shape is load-tested, comes in colours your gym can't get, and costs about half the price of PU.
Pick your
poison.
Six grip families, from forgiving buckets to mean little edges. Each one is designed and test-pulled in-house, then printed when you order it.
A full wall,
not a full wage.
Click. Print.
Pull.
No warehouse full of dusty stock. Every hold starts as a file and ends up bolted to your wall in about a week.
Pick shapes
Shop singles or a balanced set. Choose a colourway and a texture grade for each.
We print it
Your holds are printed in carbon-filled PETG with solid walls around the bolt, oriented so the load runs across the layers, never between them.
We pull it
One hold from every batch is destructively tested. If it doesn't beat spec, the whole batch gets reprinted.
You send it
Shipped within 72 hours with M10 bolts and screws. Bolt it on and climb it the same day.
Pull hard.
We tested it.
"Will it snap?" is the right question to ask about a printed hold. Here is how we answer it.
Print orientation is engineered
Layer lines run so that your pull loads them in shear across the layers, never prying them apart.
Solid where it counts
The core around the bolt is 100% solid, with eight perimeters. Bolt pull-through is the failure we design out first.
Batch-tested, published
Every batch has a test log. Scan the QR code on the back of any hold to see its result.
Static pull to failure on a 10° jig, M10 bolt torqued to 25 Nm. PU baseline from published independent pull tests. A 90 kg climber shock-loading one hold generates roughly 400–600 lbf.
Your wall,
your colours.
Printing on demand means no minimum runs. Choose one colourway for every hold, or mix them so you can set problems by colour, like your gym does.
Try a colourway on this 8ft spray-wall preview. Every hold in the shop comes in all eight.
Shop wall sets →Printed vs.
poured.
Polyurethane holds are great, and expensive. DIY prints are cheap, and untested. We sit between the two.
| Bouldrhold | Typical PU holds | DIY print (STL) | |
|---|---|---|---|
| Price per hold (sets) | ~$8–12 | $15–60 | ~$2 + your time |
| Weight (medium jug) | ~180g | ~450g | Varies |
| Lead time | 72h | 2–10 weeks | A weekend |
| Colour choice | 8, mix freely | Limited per run | Whatever's on the spool |
| Load-tested | Every batch | Yes | No |
| Texture | Grit-skin, 2 grades | Sand-cast texture | Raw layer lines |
| End of life | Take-back regrind | Landfill | Landfill |
Worn out?
Send it back.
Mail us any hold you've burned out on, ours or anyone's printed ones. We grind it, re-spool it and give you 20% off your next order. Your old crimps become someone's new jugs.
Pulled on
by people.
I set a whole spray wall for less than one Kilter pack. The Cobalt and Signal combo looks unreal under garage lights.
I own three printers and I'm still buying these. The texture finish and the test logs are worth paying for. My PETG prints felt like Lego.
We reset our kids' wall every month now. They're light enough that the kids help, and the take-back credit pays for the next batch.
Questions,
answered.
Are 3D printed holds actually safe?
Yes, when they're designed for it. We orient every print so the load crosses the layer lines, print the core around the bolt fully solid, and destructively test a sample from every batch to a minimum 4× safety factor. Like any hold, inspect them regularly and retire anything that's cracked.
What are they made of?
Carbon-fibre-filled PETG for indoor holds: tough, slightly flexible and impact-resistant. Outdoor walls get UV-stable ASA. Both have our grit-skin texture coat, so they feel like holds, not plastic.
Do they come with bolts?
Every bolt-on hold ships with an M10 hex bolt sized for it, plus a set screw. Crimps and edges ship with stainless wood screws.
Can I get custom shapes for my gym?
Yes. We design and print custom runs for gyms, setters and comps, often with less than two weeks' lead time. Email [email protected].
What's the return policy?
You have 30 days to return unused holds, no questions asked. Holds you've climbed on can go through the take-back programme for store credit.
First dibs
on drops.
New shapes every month, limited colourways and setting beta. No spam, just plastic.